check printing problem

#5 12-07-2006, 11:35 AM

In addition to the thoughts I've offered out-of-band, here's one: What's you
setting for Tools|Settings|Print checks|Print payee in first line of address
field? Mine is set. Quicken checks? Mine is cleared.

"Ron Rosenfeld" <ronrosenfeld[at]nospam.org> wrote in message
news:m8ven2t9duc8c7u1219b49d7ulp0l5ptl4[at]4ax.com...
- quote -

> I think there may be a problem with my printer driver. My check stock
> seems
> fine. Or maybe the font or font size that I am using.

#4 12-07-2006, 01:32 AM

On Wed, 6 Dec 2006 18:20:12 -0500, "Joseph Meehan" <sligojoe[at]hotmail.comwrote:

- quote -

> Ron Rosenfeld wrote:
> > I've always had this problem, but it's now more annoying.
> > > The problem was present in M2003, and persists in M2007.
> > > I use the Laser Wallet Checks which have a stub on the left, and the
> > check on the right. They are three to a page, with a "4th" slot for
> > a mini check register. They are supposed to work with Money.
> > > Everything lines up properly (both vertical and horizontal) EXCEPT
> > the Memo line, which is about one line low, maybe a bit more. It
> > actually prints mostly below the shaded area of the check (but above
> > the MICR).
> > > Any suggestions would be appreciated.
> > I just checked the location on my checks. The memo line is printed 1
> 5/8" below the payee line (measuring from the base line of the printed font.
> That works well with my checks. I use ASAP Checks.

Thanks.

I think there may be a problem with my printer driver. My check stock seems
fine. Or maybe the font or font size that I am using.

--ron

#3 12-06-2006, 10:20 PM

Ron Rosenfeld wrote:
- quote -

> I've always had this problem, but it's now more annoying.
> The problem was present in M2003, and persists in M2007.
> I use the Laser Wallet Checks which have a stub on the left, and the
> check on the right. They are three to a page, with a "4th" slot for
> a mini check register. They are supposed to work with Money.
> Everything lines up properly (both vertical and horizontal) EXCEPT
> the Memo line, which is about one line low, maybe a bit more. It
> actually prints mostly below the shaded area of the check (but above
> the MICR).
> Any suggestions would be appreciated.

I just checked the location on my checks. The memo line is printed 1
5/8" below the payee line (measuring from the base line of the printed font.
That works well with my checks. I use ASAP Checks.

--
Joseph Meehan

Dia 's Muire duit

#2 12-06-2006, 07:07 PM

Dick,

That would be very useful. I've tried to search for the specifications, but
never found them.

I don't know if the issue is the check stock, or the printer driver, so a
sample as you describe would be very useful.

Thanks

--ron

(email sent separately)

On Wed, 6 Dec 2006 11:23:46 -0700, "Dick Watson"
<littlegreengecko[at]mind-enufalready-spring.com> wrote:

- quote -

> I wondering whether your stock is correct--i.e., matches the Money spec for
> where Money intends to put things. Mine print right on for the Memo line
> relative to the other lines. Drop me an email if you want me to send you,
> say, a scan of the stock I'm using that you can compare in scale.
> "Ron Rosenfeld" <ronrosenfeld[at]nospam.org> wrote in message
> news:68jdn2d0t10uitse9j0h6ikce8j91dohib[at]4ax.com...
> > I've always had this problem, but it's now more annoying.
> > > The problem was present in M2003, and persists in M2007.
> > > I use the Laser Wallet Checks which have a stub on the left, and the check
> > on
> > the right. They are three to a page, with a "4th" slot for a mini check
> > register. They are supposed to work with Money.
> > > Everything lines up properly (both vertical and horizontal) EXCEPT the
> > Memo
> > line, which is about one line low, maybe a bit more. It actually prints
> > mostly
> > below the shaded area of the check (but above the MICR).
> > > Any suggestions would be appreciated.

--ron

#1 12-06-2006, 05:23 PM

I wondering whether your stock is correct--i.e., matches the Money spec for
where Money intends to put things. Mine print right on for the Memo line
relative to the other lines. Drop me an email if you want me to send you,
say, a scan of the stock I'm using that you can compare in scale.

"Ron Rosenfeld" <ronrosenfeld[at]nospam.org> wrote in message
news:68jdn2d0t10uitse9j0h6ikce8j91dohib[at]4ax.com...
- quote -

> I've always had this problem, but it's now more annoying.
> The problem was present in M2003, and persists in M2007.
> I use the Laser Wallet Checks which have a stub on the left, and the check
> on
> the right. They are three to a page, with a "4th" slot for a mini check
> register. They are supposed to work with Money.
> Everything lines up properly (both vertical and horizontal) EXCEPT the
> Memo
> line, which is about one line low, maybe a bit more. It actually prints
> mostly
> below the shaded area of the check (but above the MICR).
> Any suggestions would be appreciated.

12-06-2006, 02:39 PM

Ron Rosenfeld wrote:
- quote -

> I've always had this problem, but it's now more annoying.
> The problem was present in M2003, and persists in M2007.
> I use the Laser Wallet Checks which have a stub on the left, and the
> check on the right. They are three to a page, with a "4th" slot for
> a mini check register. They are supposed to work with Money.
> Everything lines up properly (both vertical and horizontal) EXCEPT
> the Memo line, which is about one line low, maybe a bit more. It
> actually prints mostly below the shaded area of the check (but above
> the MICR).
> Any suggestions would be appreciated.
> --ron

You might try using a smaller font. I don't know of a way to adjust
just the memo line.

--
Joseph Meehan

Dia 's Muire duit

#-1 12-06-2006, 01:05 PM

I've always had this problem, but it's now more annoying.

The problem was present in M2003, and persists in M2007.

I use the Laser Wallet Checks which have a stub on the left, and the check on
the right. They are three to a page, with a "4th" slot for a mini check
register. They are supposed to work with Money.

Everything lines up properly (both vertical and horizontal) EXCEPT the Memo
line, which is about one line low, maybe a bit more. It actually prints mostly
below the shaded area of the check (but above the MICR).

Any suggestions would be appreciated.

--ron

Similar Threads
Thread	Forum	Replies	Last Post
Check Printing Roy: I used to be able to print checks sequentially on my Dell Computer from Money 2002 Standard edition operating with Windows XP Home Edition. I...	Microsoft Money	3	02-15-2004 02:06 PM
Printing a check Steve: For some reason my money program will not give me the option to print a check, unless their are 2 or more checks waiting to print?	Microsoft Money	1	11-03-2003 09:30 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode