Problem printing Deluxe Checks with Money 2006

#4 10-05-2005, 03:43 AM

BTW, if it prints but is just not "on target", have you checked the
alignment settings in Setup|Print (or similar--I can't remember the exact
name)? These let you adjust on 1/16" increments l-r and u-d.

"Dick Watson" <littlegreengecko[at]mind-enufalready-spring.com> wrote in
message news:OEvemtVyFHA.3408[at]TK2MSFTNGP09.phx.gbl...
- quote -

> If you continue anyway, what happens? Have you checked the Print
> Setup|Checks stuff?
> "jtc45227" <jtc45227[at]discussions.microsoft.com> wrote in message
> news:9D311DF6-0B52-4370-95B5-8C713EF3ACB5[at]microsoft.com...
> > i too am having difficulty printing laser wallet checks in money 2006. i
> > choose to print checks. select the print test option and receive an
> > error
> > message that my "printer is not set correctly. do i want to continue
> > anyway". i am using standard deluxe wallet laser checks and have a hp
> > laserjet 4000 printer selected as the default printer. hard to believe i
> > am
> > having this issue with this setup. thank you for your help.

#3 10-05-2005, 03:18 AM

If you continue anyway, what happens? Have you checked the Print
Setup|Checks stuff?

"jtc45227" <jtc45227[at]discussions.microsoft.com> wrote in message
news:9D311DF6-0B52-4370-95B5-8C713EF3ACB5[at]microsoft.com...
- quote -

> i too am having difficulty printing laser wallet checks in money 2006. i
> choose to print checks. select the print test option and receive an error
> message that my "printer is not set correctly. do i want to continue
> anyway". i am using standard deluxe wallet laser checks and have a hp
> laserjet 4000 printer selected as the default printer. hard to believe i
> am
> having this issue with this setup. thank you for your help.

#2 10-04-2005, 05:58 AM

i too am having difficulty printing laser wallet checks in money 2006. i
choose to print checks. select the print test option and receive an error
message that my "printer is not set correctly. do i want to continue
anyway". i am using standard deluxe wallet laser checks and have a hp
laserjet 4000 printer selected as the default printer. hard to believe i am
having this issue with this setup. thank you for your help.

jtc

"Art McClinton" wrote:

- quote -

> I use the same checks with no difficulty. It sounds like when you go to
> print checks you have the the question, "how many checks are on the
> first page" incorrectly. Money will only print in portrait mode if you
> answer that question as 3. It will also decrement the number
> automatically. Money expects you to turn the checks 90 degrees if you
> have only 1 or 2 checks on the page. This however is does not work on
> all printers; so many of us have developed various ways around this.
> Since I now generally only have a single check to print in a month I
> will always change the count to 3 no matter how many checks exist.
> Obviously do not print more checks at a time than actually exist on the
> sheet of checks.
> Hope I understood your problem.
> Art
> Dick Watson wrote:
> > Have you set the settings to Laser Wallet (I'm guessing that's the right
> > style.) Have you made sure to tell the Print Checks dialog how you want to
> > print partial sheets and how many checks are on the sheet?
> > > "honeyeight" <honeyeight[at]discussions.microsoft.com> wrote in message
> > news:848E2942-BF74-49E2-A155-02C80EC31D96[at]microsoft.com...
> > > > I tried printing bills on my new Deluxe Checks (3 per page, prod # 80976)
> > > and
> > > the test print worked fine. It printed on the correct check and was in
> > > portrait format. I then put a real 3 on a page form and the check printed
> > > out in landscape format making it unusable. Has anyone else had this
> > > problem? I am still using the trial version of Money 6. Could it have
> > > something to do with that? I never changed the orientation of my printer
> > > at
> > > all so I can't figure out why it would print portrait correctly on the
> > > test
> > > print and landscape (incorrectly) on the real check. I have already gone
> > > through 2 pages of 3 on a page checks and it's happened both times.
> > > Deluxe
> > > Checks said they couldn't help me and that I should contact MS. MS
> > > doesn't
> > > recognize the PID for my trial version which is why I am posting to this
> > > newsgroup. HELP!!!!!
> > >

#1 08-05-2005, 04:15 AM

I use the same checks with no difficulty. It sounds like when you go to
print checks you have the the question, "how many checks are on the
first page" incorrectly. Money will only print in portrait mode if you
answer that question as 3. It will also decrement the number
automatically. Money expects you to turn the checks 90 degrees if you
have only 1 or 2 checks on the page. This however is does not work on
all printers; so many of us have developed various ways around this.
Since I now generally only have a single check to print in a month I
will always change the count to 3 no matter how many checks exist.
Obviously do not print more checks at a time than actually exist on the
sheet of checks.

Hope I understood your problem.

Art

Dick Watson wrote:
- quote -

> Have you set the settings to Laser Wallet (I'm guessing that's the right
> style.) Have you made sure to tell the Print Checks dialog how you want to
> print partial sheets and how many checks are on the sheet?
> "honeyeight" <honeyeight[at]discussions.microsoft.com> wrote in message
> news:848E2942-BF74-49E2-A155-02C80EC31D96[at]microsoft.com...
> > I tried printing bills on my new Deluxe Checks (3 per page, prod # 80976)
> > and
> > the test print worked fine. It printed on the correct check and was in
> > portrait format. I then put a real 3 on a page form and the check printed
> > out in landscape format making it unusable. Has anyone else had this
> > problem? I am still using the trial version of Money 6. Could it have
> > something to do with that? I never changed the orientation of my printer
> > at
> > all so I can't figure out why it would print portrait correctly on the
> > test
> > print and landscape (incorrectly) on the real check. I have already gone
> > through 2 pages of 3 on a page checks and it's happened both times.
> > Deluxe
> > Checks said they couldn't help me and that I should contact MS. MS
> > doesn't
> > recognize the PID for my trial version which is why I am posting to this
> > newsgroup. HELP!!!!!

08-05-2005, 02:10 AM

Have you set the settings to Laser Wallet (I'm guessing that's the right
style.) Have you made sure to tell the Print Checks dialog how you want to
print partial sheets and how many checks are on the sheet?

"honeyeight" <honeyeight[at]discussions.microsoft.com> wrote in message
news:848E2942-BF74-49E2-A155-02C80EC31D96[at]microsoft.com...
- quote -

> I tried printing bills on my new Deluxe Checks (3 per page, prod # 80976)
> and
> the test print worked fine. It printed on the correct check and was in
> portrait format. I then put a real 3 on a page form and the check printed
> out in landscape format making it unusable. Has anyone else had this
> problem? I am still using the trial version of Money 6. Could it have
> something to do with that? I never changed the orientation of my printer
> at
> all so I can't figure out why it would print portrait correctly on the
> test
> print and landscape (incorrectly) on the real check. I have already gone
> through 2 pages of 3 on a page checks and it's happened both times.
> Deluxe
> Checks said they couldn't help me and that I should contact MS. MS
> doesn't
> recognize the PID for my trial version which is why I am posting to this
> newsgroup. HELP!!!!!

#-1 08-02-2005, 10:10 PM

I tried printing bills on my new Deluxe Checks (3 per page, prod # 80976) and
the test print worked fine. It printed on the correct check and was in
portrait format. I then put a real 3 on a page form and the check printed
out in landscape format making it unusable. Has anyone else had this
problem? I am still using the trial version of Money 6. Could it have
something to do with that? I never changed the orientation of my printer at
all so I can't figure out why it would print portrait correctly on the test
print and landscape (incorrectly) on the real check. I have already gone
through 2 pages of 3 on a page checks and it's happened both times. Deluxe
Checks said they couldn't help me and that I should contact MS. MS doesn't
recognize the PID for my trial version which is why I am posting to this
newsgroup. HELP!!!!!

Similar Threads
Thread	Forum	Replies	Last Post
Money '04 Printing checks David: I am trying to print a single check. It is not recognized. When I have 2 or more, then I can print. I hate making duplicate entries and then...	Microsoft Money	1	09-16-2004 08:11 PM
Printing checks in Money 04 Richard Lundgren: I'm having trouble printing wallet checks on partial pages. Money prints fine when printing on a full sheet of 3 checks, but when I need to print on...	Microsoft Money	3	04-12-2004 10:11 AM
Problem with printing continuous feed checks No one: Does anyone have experience with printing continuous feed checks? When the last check prints it printer does not "line feed" sufficiently for me to...	Microsoft Money	1	01-23-2004 05:25 PM
Printing Checks - Different style checks for different accounts Mark Savage: I'm having a problem printing checks from Money 2003. I have three accounts that come up in one .mny file. Two of the accounts use 3-on-a-page...	Microsoft Money	3	10-06-2003 12:00 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode